Sando Safety Splash Glasses

The wraparound Sando Safety Splash Glasses are lightweight and provide a large field of vision for higher visibility. The safety glasses are equipped with anti-fog and scratch resistant coating. Slim, flexible temples provide a comfortable fit. The safety frame is suitable for wearing with helmet and/ or ear protection.

Cleaning and Disinfecting of Splash Safety Glasses

Uncoated Lenses

Safety lenses (with or without prescription) that do not have any coatings applied such as anti-fog or anti-reflective coatings.

DO NOT USE ALCOHOL-BASED CLEANERS. It can damage the safety lens.

• Clean with hand soap or natural lens cleaners with no microbeads or grit added.
• Gently rub safety lenses in straight lines under clear running water.
• Dry with a soft, lint-free cloth.
• You can also use non-alcohol-based wipes.

Anti-fog Coated Lenses

Leaded lenses that are coated with anti-fog.

DO NOT USE ALCOHOL-BASED CLEANERS. It will degrade the anti-fog coating.

• Clean with hand soap or natural lens cleaners with no microbeads or grit added.
• You can also use non-alcohol-based wipes.
• Use light pressure in straight lines, thoroughly cleaning all surfaces of leaded lenses and frame.
• Dry with a microfibre cleaning cloth.

Anti-reflective Coated Lenses

Safety lenses that are coated with an anti-reflective/ anti-glare coating.

DO NOT USE ALCOHOL-BASED CLEANERS. It will degrade the anti-reflective coating.

• Clean with hand soap or natural lens cleaners with no microbeads or grit added.
• Gently rub leaded lenses in straight lines under clear running water.
• Dry with a soft, lint-free cloth.

Caution

DO NOT AUTOCLAVE. NEVER USE AMMONIA OR CHLORINE-BASED CLEANERS.
Safety Glasses cannot be disinfected in a pressure chamber (autoclave) or cleaned with Ammonia and chlorine-based cleaners as they harm the safety lenses and the frame material, which is usually made of plastic (e.g. polycarbonate or TR90).

DO NOT USE CIRCULAR MOTIONS WHILE CLEANING, AS IT CAN DAMAGE APPLIED COATINGS.
Manufacturers do not recommend circular motions while cleaning the safety lens as it can damage applied anti-fog and anti-reflective coatings and lose its functionality.

Safely Wearing and Storing Your Safety Glasses

ALWAYS USE YOUR HARD CASE

• Always place your safety glasses inside your hard case every time you take them off. 
• Do not leave your safety glasses in a hot area. The heat can warp the frame.
• Do not set your safety glasses close to the sinks and vanities. They can get splashed with corrosive substances in these areas.
• Avoid putting your safety glasses on top of your head. The top of the head is generally wider than the face and can widen the frame.
• Don’t push on the nosepiece. The motion can distort the nosepiece; try to adjust the nosepiece before placing it on your face.
• If you need to remove your safety glasses constantly, make sure to use an adjustable strap that can hold your safety glasses.

Explore the most frequently asked questions about Splash Safety Glasses below. All general FAQs - ordering, paying and warranty - can be found in the main FAQ section. If you still need help, then please reach out by live chat or email us at hello@safeloox.com.

Prescription Splash Safety Glasses

Custom Engraving

Receiving Your Parcel

Our orders are dispatched daily from our Melbourne warehouse and are mainly delivered by Australia Post. We recommend sending deliveries to an address where you or a work colleague can receive the parcel in person, to a free Australia Post Parcel Locker or PO Box. If the delivery address is unattended, your property will be held for collection at the nearest post office. Your delivery is registered and requires a signature on delivery or pick up. All deliveries can be tracked via Australia Post. If there's something we can do to make your delivery more convenient for you, contact SAFELOOX.

Estimated Processing and Delivery Times

When products are temporarily out of stock, a delivery time of 3 to 4 weeks from order to delivery can apply.